Kohler Vinnata K-690 Guia De Instalacion página 4

3" (7.6cm)
or Larger
2. Connect Supplies
- If the sink is not installed, install it at this time. Be sure to follow all
instructions packed with the sink.
CAUTION: Risk of restricted water flow and product damage. Use
extreme care when connecting all hoses to avoid kinking and twisting.
Hoses must not be taut after installation.
:
NOTE If your installation requires that you coil the supply hoses to
obtain a good connection, maintain an inside coil diameter of at least
3" (7.6cm).
- Carefully position the hot and cold supplies so they will not interfere
with other hoses.
- Connect the supply hoses to the supply stops.
:
NOTE The most common faucet installation is with the handle
positioned to the right. Pull the handle for cold water or push the
handle for hot water.
If the handle is installed to the left or centered, reverse the supply
hoses (connect the hose for cold water to the hot supply and the
hose for hot water to the cold supply). This will maintain the
relationship of pulling the handle for cold water or pushing for hot
water. If the handle is centered, press it to the right for cold water
or to the left for hot water.
C
1013943-2-
Spray
Hose
Cold
COLD
HOT
Valve Outlet
Hose
4
Kohler Co.