ACCO REXEL CB206 Guia Del Usuario página 7

CB206_15_08_03_IM_ver3.qxd 15/08/2003
Getting Started
6. Comb Binding
• Load the front cover onto the open comb and lower it towards the
front of the machine. [Fig. 5]
• Load the internal sheets onto the open comb, repeating until all are
loaded.
• Load the rear cover onto the open comb.
• Turn the comb opening knob clockwise and remove the bound
document.
7. Correcting a Bound Document
Additional sheets may be included or removed at any time by opening
and then closing the comb binding as described in sections 3 and 6.
8. Emptying the Waste Tray
Important: The waste tray must ONLY be emptied with the machine
supported in a upright position.
• Stand the machine upright.
• Unclip the tray from the underside of the machine. [Fig. 6]
• When refitting the tray ensure that it clicks firmly into place before
returning the machine to normal operation.
9. Storage
• Lower the handle, if raised.
• The machine incorporates feet at the rear to allow vertical storage.
13:41 Page 2
10.
• A Security Slot is fitted for use with leading makes of security leash.
E.g.: Kensington Microsaver (
Technical Data
Max. Binding size
Hole pitch
Number of punch slots
Margin depth
Punching - paper (80gsm)
Max. punching - plastic foils (0.2mm)
Plastic comb capacity
Max. document size (sheets)
Edge guide options
Net weight (kg)
Dimensions (cm)
2
Security
).
DIN A4 (max. 297mm)
US Pitch 9/16" / 14,28mm
fixed 2.5mm
A4, US Letter & Cover
44 x 25 x 13.5
GB
CB206
21 fixed
max. 10
max. 1
5-16mm
140
3.85