Section 2: Gm Lan 11; From The 16-Pin Harness; From The 22-Way Harness - Axxess AX-ADGM100 Manual Del Usuario

Section 2: GM LAN 11

CHEVROLET
Cobalt 2007-2010
HHR 2006-2011
Malibu 2008-2012
PONTIAC
G5 2007-2008
G6 (5th digit of VIN
must be a J, K, or L)
Connections to be made

1. From the 16-pin harness:

Connect the (2) Red wires to the ignition/accessory wire of the
•
aftermarket radio.
Connect the Orange/White wire to the illumination wire of the aftermarket
•
radio. If the aftermarket radio has no illumination wire, tape off the Orange/
White wire.
Connect the Blue/White wire to the amp turn on wire of the
•
aftermarket radio.
Connect the Brown wire to the mute wire of the aftermarket radio. If the
•
aftermarket radio does not have a Mute wire, tape up the Brown wire.
Connect the White wire to the left front positive speaker output of the
•
aftermarket radio. Continues on next paragraph.
APPLICATIONS
PONTIAC (Continued)
Solstice
SATURN
Aura
Sky
2009
AX-ADGM100
Connections to be made
• Connect the White/Black wire to the left front negative speaker output of
the aftermarket radio.
Connect the Gray wire to the right front positive speaker output of the
•
2006-2009
aftermarket radio.
Connect the Gray/Black wire to the right front negative speaker output of
•
the aftermarket radio.
2006-2009
The Violet wire is not used in the application.
•
2006-2009
• The Violet/Black wire is not used in the application.
• The Green wire is not used in the application.
• The Green/Black wire is not used in the application.
The following wires are for the aftermarket radios that have navigation built in:
• Connect the Light Green wire to the parking brake wire of the aftermarket
navigation radio.
• Connect the Blue/Pink wire to the VSS or speed sense wire of the
aftermarket navigation radio.
Connect the Green/Purple wire to the reverse wire of the aftermarket
•
navigation radio.

2. From the 22-way harness:

• The Black/Yellow wire will be discussed later on in the instructions.
• The DIN plug is to be connected to the optional AX-LCD screen if satellite
radio is being retained.
• If the AX-LCD screen will be used, connect the Red wire to accessory power.
8
Continued next page