Little Tikes Jett Car Racer Instrucciones De Montaje página 2

Thank you for choosing the Little Tikes
We strive to provide a durable, easy-to-assemble toy thats made to last,
giving your child years of imaginative, engaging fun!
Really important information you should know!
• Read through all the instructions first.
• Clear a flat surface to lay out all the materials so everything is close at hand.
• You will need a Phillips head screwdriver (power driver, recommended, not included)
hammer and safety glasses (not included) to assemble the Jett Car Racer™.
- When installing screws, be sure screws are tightened snugly, but do NOT OVERTIGHTEN.
• Be sure to locate your decals and set aside. Decals are easier to apply when the part is
laying flat, so you may want to apply the decals before assembly.
• The parts are listed below - each part is identified with a letter in RED for easy reference.
• Illustrations are for reference only. Styles may vary from actual contents.
• If you have any questions, we're here to help. Give our customer service team a call at 1-800- 321-0183.
WARNINGS!
• Keep these instructions for future reference.
• Prior to assembly, this package contains small parts: hardware which is a choking hazard
and may contain sharp edges and sharp points. Keep away from children until assembled.
• Ride-on toys should not be used near swimming pools, on or near steps, hills, roadways,
or inclines.
• Shoes must be worn at all times.
• Only one rider at a time.
• Maximum weight limit: 105 lbs. (47.6 Kg)
• This product is intended for use by children ages over 3 - 10 years.
• Adult supervision required. Do not leave children unattended.
• This product is intended for outdoor domestic family use only.
• Protect your eyes. Always wear safety glasses when using a hammer.
• When temperatures fall below 0°F/-18°C, outdoor use of this product is not recommended.
In extreme cold, plastic materials lose resilience and may become brittle and crack upon
impact. Store product in a warmer, protected place.
DISPOSAL
Disassemble and dispose of equipment in such a manner that no hazardous conditions such as,
but not limited to, small parts and sharp edges exist at the time equipment is discarded.
©
Jett Car Racer™.
2