Little Tikes Jett Car Racer Instrucciones De Montaje página 9

4
Steering - finish up!
Inside, align the steering linkage center with the pin opening. From inside the body, insert a
steering linkage pin (part F) and push through to the outer side. REPEAT ON THE OTHER SIDE.
L
Insert the steering linkage TOOL
(part L) into the body.
Locate pin hole, inside the body.
B
Place large cap nut (part B)
into cap nut tool.
9
F
Really give it a good hit!
Place on the end of the steering
linkage pin. Hammer cap nut onto
steering pin. Repeat on other side.
x2