BAR DESIGNED INDOOR ANTENNA
Instruction manual
CONTENT
UHF antenna
INSTRUCTIONS
1
Select the area where you want to place the antenna:
OPTION A:
On a wall
Make drilling marks.
Verify the distance between the
antenna holes (Approximately
28 cm).
OPTION B: On a surface
Insert holder in the rear part of the antenna.
2
Plug in the coaxial cable to the TV.
ANT-9017
V0.0
0517m
Drill in the marks.
Place the antenna in a free area, on a flat and stable surface.
IMPORTANT
Read these manual to avoid any damage.
The instructions of these manual are for reference about the product.
There may be differences due to update.
Please check our web site www.steren.com to obtain the latest version of the
instruction manual.
CAUTIONS
• This product cannot be used by people with different abilities, unless they have
preparation and supervision.
• This product is NOT a toy; keep it away from children.
• Do not use or store the product in places where there dripping or splashing.
Holder
Insert the anchors and screws.
Remember do not to fully insert the
screws, leave a reline of about 0.5 cm.
3
Perform a searching digital channels in your TV. If it is necessary,
reorient the antenna.
SPECIFICATIONS
Specifications ay vary without previous notice
Operating frequency: UHF: 470-862 MHz
Gain: 2.3 dB
Impedance: 75 ohms
Output level: 105 dB µV max.
Noise: < 3.5 dB
Screws
(x2)
Anchors
(x2)
Hang the antenna on the screws.