MAINTENANCE
LUBRICATION
The equipment is lubricated at the factory. However, it is recommended to check the
lubrication regularly, to ensure optimal operation of the equipment.
Every 15 days of use, lift the running belt from the side and touch the bottom of the
running belt and the deck. If there are traces of silicone, lubrication is not necessary. If
the surface is dry, lubricate otherwise, follow the instructions below, using the rules of
use as a reference:
•Less than 3 hours per week - Lubricate every 5 months;
•4 to 7 hours a week - lubricate every 2 months;
•Greater than 7 hours a week - Lubricate once a month.
Generally, it is not necessary to lubricate the treadmill in the first year or in the first 500
hours, but this period may vary due to its method of use, so it is necessary to check the
lubrication.
LUBRICANT APPLICATION METHOD
To perform lubrication, use lubricant that comes with the
equipment, if necessary, purchase Movelub from
authorized dealers or directly from Movement.
1 - Position the running belt so that the seam is up.
2 - Insert the extender into the lubrication applicator, as
shown.
3 - At the front of the treadmill next to the shroud, lift the
LUBRIFICATION TUBE
running belt on one side and position the applicator, below
and in the center of the running belt.
4 - Gradually apply a maximum of 20ml of lubricant to the
APPLICATOR
back of the treadmill.
5 - After application, turn on the equipment at a speed of
4.0 km / h and leave the treadmill on for 10 minutes, so that
the lubricant is spread best on the running belt.
6 - To ensure the quality of the lubrication, disconnect the
treadmill and check that the lubricant has spread evenly
over the running belt. Lift the edges of the canvas to check,
the lubrication must not exceed 30 to 50mm from the edge
of the running belt, on both sides.
.
41