Elba P60 Instrucciones Para El Uso página 24

FASTENING THE
INSTALLATION BRACKETS
(figs. 4.4a, 4.4b, 4.4c)
Each cooker top is provided with an
installation kit including brackets and
screws for fastening the top to fixture
panels from 2 to 4 cm thick.
Turn the cooker top upside down and
fasten the brackets "F and R" to the
appropriate socket holes, without tigh-
tening the screws "B" for the moment.
Make sure that the brackets are faste-
ned as shown in figure 4.4a.
Rear side
D
R
24
R
Fig. 4.4a
Fig. 4.4b
B
FASTENING THE COOKER
TOP
(figs. 4.4b, 4.4c)
Spread the sealing material "D" out
along the fixture hole, making sure
that the junctions overlap at the cor-
ners.
Insert the cooker top into the hole and
position it correctly.
Adjust the position of the brackets "F
and R" and tighten screws "B" to block
the cooker top firmly in position.
With a sharp cutter or trimmer knife
trim the excess sealing material
around the edge of the cooker top.
R
F
Fig. 4.4c
F
Front side
D
B
F