Technical Data; Specified Conditions Of Use; Safety Instructions - Gude GE 145 W Traducción Del Manual Original

ENGLISH

Technical Data

WelderGE 145 W
Art. No ...............................................................................................................................................................................................20001
Service connection .......................................................................................................................................230 V ~ 50-60 Hz
Rated input voltage AC Voltage U
Protection ................................................................................................................................................................................ 16 A
Maximum rated input current I
Maximum effective input current I
Idle voltage U ...................................................................................................................................................................................48 V
0
Degree of protection ................................................................................................................................................................... IP 21S
Insulation class ........................................................................................................................................................................................ H
Welding current I ...........................................................................................................................................................................100 A
2
Operating voltage U .......................................................................................................................................................................22 V
2
Material thickness ................................................................................................................................................................. 1,5 - 4mm
Regulated section .................................................................................................................................................. 40 A - 100 A
Dimensions ......................................................................................................................................................... 330 x 175 x 250 mm
Weight ..................................................................................................................................................................................13,1 kg
......................................................................................................................................................................................MMA
Electrodes ..................................................................................................................................................................... 1 -3,2 mm
* Actual working time and total working time ratio.
Switch-on time determined at 40°C using simulation
Read and understand the
operating instructions before
using the appliance. Abide by all
the safety measures stated in the
service manual. Act responsibly toward third parties.
In case of any doubts about connection and
operation refer please to our customer center

Specified Conditions Of Use

Welder in protective atmosphere for thermal connec-
tion of ferrous metals by melting edges and including
mixture
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.Please
note that our equipment has not been designed for
commercial, craft or industrial use. If the equipment is
used in commercial, craft or industrial operation or for
similar activities, we cannot assume any liability.
Ambient temperature -10 °C - +40 °C
Relative air humidity max. 50 % (40 °C), 90% (20 °C)
Altitude above sea level max. 1000 m
The ambient environment must be free from
abnormal amounts of dust, acids, corrosive gases or
substances.

Safety instructions

WARNING! Electric shock! There is a risk of
an injury caused by electric shock!
.......................................................................................................................................... 230 V
1
.........................................................................................................................................22.3 A
1max
.....................................................................................................................................6.61 A
1eff
IP21 protection degree of the welder. The welder
must not be exposed to rain and moisture when
being operated or stored.
Check the voltage. Technical data given on the type
label must correspond with electric network voltage.
Insert the plug of the electrical cable in a socket of
suitable shape, voltage and frequency complying
with current regulations.
Use extension cables with a maximum length of 5
meters and with a cable cross-section of not less than
1.5 mm2. Use of extension cables of different length
and cross-section and also of adapters and multiple
sockets should be avoided.
Check the cable and/or socket for damages before
the appliance putting into operation.
Defective cable or plug may cause electric shock.
Do not pull the service cable to pull the plug out of
socket.
Do not expose yourself or other persons without pro-
tection to electric arc or hot metal. Spraying welding
pearls may cause burns.
A suitable welding shield, protective clothes and
protective gloves to be worn at all times.
Long-term inhalation of welding gases may be harm-
ful to your health.
Work with an exhaust system or in well ventilated
spaces. Avoid direct inhalation of gases.
Contact with the hose bundle nozzle and the material
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).