Set Language - Mowox RM 600 Li BT Instrucciones De Funcionamiento Originales

Rain sensor
The robotic mower has got a rain sensor and may prevent the robot from mowing in the
rain. In the default factory setting, the robot returns back to the charging station if rain
is detected on board. Then it will be fully charged. After charging it will stay in the
charging station for further 2 hours before restarting to mow.
Do not short-cut the two metal sensors by metal or another conductor. This will make the
robot work abnormal.
The Robotic mower can cut wet grass - but wet grass will accumulate on the blade disc and
wheels, leading you to more frequent cleaning of the unit.
Do not use the robotic mower during lightning to avoid damage to
the electronic circuits. We strongly recommend to unplug the
charging station and to disconnect the boundary wire from the

Set language

• Step 1: Move the cursor to the general settings
• Step 2: Move the cursor to Language, then press the OK key
2018-08-25
08-59-21
• Step 3: Use
Language
■English
Deutsch
Dansk
česky
Slovaščina
W Języku polskim
Rev 7
Mowing in the rain is not r ecommended.
base station, too.
Robot
Mower
Bat
or to move the cursor to the language you want. After the
, then press the OK key
■
28 (EN)
.
General Setting
Set Date and Time
Mow in the Rain
Language
Secondary areas
Information
Language
Magyar
■
Francais
.