Publicidad
from the vehicle.
8. Carefully press the Large grommet and the tail light
wiring harness inward, inside the vehicle and thread the
4-flat connector out through the grommet, down behind
the tail light assembly and under the vehicle.
9. Carefully replace the grommet into it's mounting hole,
ensuring it is firmly seated and sealed against the body.
Note: It may be necessary to slit the grommet slightly to
provide clearance for the T-Connector.
10. Replace the tail light assembly, making sure the
T-Connector harness is routed inside the body behind the
housing.
11. Secure the 4-flat connector under the vehicle using the
cable tie provided.
INSTRUCCIONES DE INSTALACIÓN
Français:
1. Lire les instructions attentivement avant de
commencer.
2. Localisez le harnais de
câblage de lumière de queue de
véhicules près d'ouvrir la porte
de couverture de stockage de
cric sur le panneau d'équilibre
intérieur (de conducteurs)
d'arrière gauche de côté. Le harnais de
Fig. 1
Publicidad
