Teka LP2 400 Manual De Instrucciones página 25

When "
Have you checked whether:
the drain hose is crimped or bent.
the drain hose is too high.
When "
Have you checked whether:
the water is turned on and the hose is connected properly;
the water supply to the house is on and has suffi cient pressure;
the water supply hose is crimped or bent;
the fi lter for the water supply hose is clogged.
the drain hose is too low.
If you take all these checks and the dishwasher still does not function
or your dishwasher have any other error display, you can power the
dishwasher OFF, and wait a few minutes. You can power the dishwasher
on, try it again , if the dishwasher still does not function and/or the
problem persists, contact the nearest authorised service center and
provide them with the following information:
the nature of the problem.
the model type number (Mod...) And the serial number (S/N...), which are indicated
on the plate located on the side of the inner part of the door.
Lower spray arm rotates with diffi culty
Spray arm is blocked by small items or food remains.
Lid in detergent compartment cannot be closed
Detergent compartment has been overfi lled.
Mechanism is clogged with remnants of detergent.
Remnants of detergent stuck inside dispenser
Compartment was damp when it was fi lled up with detergent. Compartment must be
dry before detergent is added.
" indicators blinks.
" indicators blinks.
E
en
23