Turn
Touch On/Off pad for an individual burner or
touch the All Off pad.
Burner(s) Off
Selecting
Choose the element/burner that is best fit to
the cookware size. Each element/burner on
Cooktop
your new cooktop has its own power levels
Settings
ranging from low to high. Power level settings
necessary for cooking will vary depending on
the cookware being used, the type and quantity
of food, and the desired outcome. In general
use lower settings for melting, holding and
simmering and use higher settings for heating
quickly, searing and frying. When keeping foods
warm confirm selected setting is sufficient to
maintain food temperature above 140°F. Larger
elements and elements marked "Keep Warm"
are not recommended for melting.
How To
To Turn On
Hold the Sync Burners pad for about half a
Synchronize
second to connect the two burners. Operate
Left Elements
either element as described on page 7 to
adjust power level.
49-80762-1
Using Your Cooktop
Radiant Cooktop
Hi is the highest power level, designed for
large quantity rapid cooking and boiling. Hi will
operate for a maximum of 10 minutes. Hi may
be repeated after the initial 10 minute cycle by
pressing the + pad.
CAUTION: Do not place
any cookware, utensils or
leave excess water spills
on control key pads. This
may result in unresponsive
touch pads and turning off
the cooktop if present for
several seconds.
To Turn Off
1. Touch the On/Off pad on either burner to
turn off the Sync Burners.
or
2. Touch the Sync Burners to turn both
burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
Low
melting
13