BH FITNESS KHRONOS G260 Manual Del Usuario página 9

ELECTRONIC MONITOR.-
MAINS CONNECTION.
Insert the jack (m) for the transformer
into the connection hole (k) on the
main body (bottom, rear of the
machine) and
transformer into a 220 V mains supply.
Fig.1.
Note: The transformer
necessary to charge the battery after
long periods of inactivity.
To give you greater control over your
exercise, this electronic unit provides
simultaneous read-outs
distance, exercise time, watts, calories
burnt and pulse rate.
If at any time during exercise you
press the START/STOP button then
all of the unit's functions will stop.
Pressing the START/STOP button
again will restart the machine.
The monitor will switch itself off
automatically if the unit stands idle for
more than 90 seconds.
Important:
components in special containers,
Fig.2.
MONITOR FUNCTIONS.-
This electronic unit has seven function
keys: RECOVERY,
START / STOP; RESET, MODE; ▲;
▼. PULSE / THR is display at the top
of the monitor. The centre of the
screen will simultaneously display the
selected program level. There are
windows at the display that indicate
the SPEED / RPM; TIME; DISTANCE;
WATT, CALORIES.
This monitor also has 1 manual
then plug
is
of speed,
Deposit electronic
BODYFAT,
English
program, 12 pre-set exertion level
programs; 4 user defined program
(U1-U4);
programs and 1 steady watt rate
program.
With the monitor either stopped or
the
working the SPEED / RPM windows
give
seconds.
only
CHANGING FROM ONE WORK
MODE TO ANOTHER.-
This monitor allows you to work in 4
different modes: Manual, Program,
User and Pulse (TARGET HR). In
order to pass from one mode to
another
button to stop the monitor, then press
RESET and, with the help of the ▲/▼
buttons and MODE key, select the
desired mode.
USER U1-U4.-
The Male / Female symbols will
appear, Select using the ▼▲ keys
and press MODE to confirm. Then
Age will appear, select using the ▼▲
keys (between 1 to 99) and press
MODE to confirm. It will now ask for
your height, select using the ▼▲ keys
(between 100 to 200 cm) and press
MODE to confirm. Weight will appear,
select using the ▼▲ keys (between
20 to 150kg) and press MODE to
confirm.
MANUAL FUNCTION.-
After entering your personal data the
LEDs for the various programs will
start flashing the monitor USER,
MANUAL, PROGRAM and HRC.
Press the ▲/▼ keys to select the
MANUAL function and press MODE.
9
4 Heart
alternate displays
press the
Rate Control
every 5
START/STOP