Ordering Information - DENTSPLY digit power Guia De Funcionamiento

INSERT CONVERSION
For conversion of digit power ™ Regulators from and to any of the following configurations: ISO Threaded Connector; MIDWEST
StarDental HiFlo ® Insert; KaVo MULTIflex
• Step 1: If converting a coupler system to another coupler system skip to Step 3. NOTE: Coupler insert may vary from photos depending on configuration.
• Step 2: If converting an ISO threaded connector to a coupler system, remove the ISO connector from the bottom of the regulator using a wrench (not provided).
Turn counter clockwise to remove. Skip to Step 5.
• Step 3: If converting a coupler system to another coupler system, remove the old insert from the bottom of the regulator using the 5/32 hex key.
Turn counter clockwise to remove.
• Step 4: Important: Ensure that the o-ring on the coupler insert is also removed and not lodged inside the regulator body.
• Step 5: Thread the desired coupler insert into the bottom of the regulator using caution to avoid cross threading the parts. Turn clockwise to install.
• Step 6: Tighten the coupler insert using the 5/32 hex key. Turn clockwise to tighten.
Step 2
Step 5

ORDERING INFORMATION

digit power ™ Dispenser Accessories
INSERT CONVERSION KIT: Includes 1 Insert, 1 Hex Key
678096 ISO Threaded Connector Insert Compatible with ISO 4-hole, 5-hole fiber optic, and 6-pin dental hoses
678097 MIDWEST ® Insert Compatible with MIDWEST
678098 KaVo MULTIflex ® Insert Compatible with KaVo MULTIflex
678099 StarDental HiFlo ® Insert Compatible with StarDental HiFlo
678079 Disposable Barrier Sleeves (50)
678091 Cap Refill (1)
678092 Grip Refill (1)
678093 Adapter Refill (1)
678094 Air Supply Hose Refill (1 Extra Long)
® Insert
® Stylus ™ and XGT couplers (not ATC)
® coupler
® Swivel Connectors
Step 3
o-ring
Step 6
® Insert (Stylus ™ and XGT);
Step 4
KaVo MULTIflex and StarDental HiFlo are not registered
trademarks of DENTSPLY International
©2013 DENTSPLY International. All rights reserved. Form #578054 (8/21/13)
Manufactured by:
DENTSPLY Caulk
38 West Clarke Avenue
Milford, DE 19963 USA
Phone: 1-302-422-4511
www.dentsply.com