Setting the speaker volume
There are seven adjustable levels.
K
¢
¢
Audio setup
Speaker Volume
q
Select the required volume and confirm with
The current value will be displayed.
q
Hinweis
Instead of using the
key you can also use the
Mute
You can mute only the microphone or the speaker and microphone.
K
¢
¢
Audio setup
Mute mode
q
Select the required function and confirm with
Microphone off: You are still able to hear the person on
the end of the line, however they cannot hear you.
Micro&Spk. Off: The telephone is completely muted.
Mute melody: Whilst in mute mode, the person on the
other end of the line hears a melody.
£
The set function can also be activated using the mute key during a call
(
page 8).
Setting the ringer
¤
The following optional settings are available:
¤
Melody and volume
¤
VIP Melody
Switching the ringer off
Setting the melody and volume
You can set the ringer melody and volume or switch the ringer off. There
are 10 different ringers available, the volume can be adjusted in 5 levels
(0=silent).
Note
The melodies are played over the speaker if you lift the handset
before commencing with the settings.
£
You can also change both settings directly using the keys while the tele-
K
phone is ringing (
page 8).
¢
¢
Audio setup
Ring tones
~
Select the required ringer.
Q
O
...
D
E
/
Set the volume for the ringer currently selected.
q
Change the ringer playing speed (1 = slow, 3 = fast).
[
Press the control key to save the setting.
Note
The ring melody can only sound perfectly when the ring pulse arrives
from the telephone network. The length of the pulses may differ from
network to network. It is therefore possible that some ring tones for
selection may seem clipped. If this is the case please select another
ring tone.
el en es it pt
[
D
E
/
Ringer 1 - 10
Setting the VIP Melody
You can set one of the ringers as VIP Melody. When you have assigned a
number from the phonebook VIP mode status (
K
call from this number will be indicated with the VIP Melody ring tone.
¢
.
Audio setup
~
D
E
keys.
/
q
[
Setting the ring mode
[
.
If you do not wish to be disturbed, you can switch off the telephone's
ringer. The three following optional settings are available: All tones off,
K
VIP only (see above), All tones on (default setting).
¢
Audio setup
q
[
Switching the ring tone off using the key
+
Once the ring tone has been switched off, this is indicated with the
symbol in the display.
Security settings
Locking the telephone
You can secure your telephone against unauthorised access by using the
Key lock.
Setting up the Key lock
When the Key lock is activated, all keys are locked, with the exception of
the hands-free key and the stored emergency numbers (
Activating the Key lock
$
or
K
¢
Security
Deactivating the Key lock
$
Once the key lock has been switched on, this is indicated with the
symbol and Key locked in the display.
Emergency calls
There are two emergency numbers stored in the telephone as a default
setting (110, 112). You can store an additional emergency number with
a max. of 28 digits. These emergency numbers can also be selected
when the Key lock is switched on.
¢
VIP Melody
Select the required ringer.
Q
O
...
Ringer 1 - 10
Set the volume for the ringer currently selected.
Change the ringer playing speed (1 = slow, 3 = fast).
Press the control key to save the setting.
¢
Ringer mode
Select the required setting and confirm with
Press the control key to save the setting.
Hold the key down to switch the ring tone off and back on.
When the telephone is on stand-by, press and hold down
the lock key.
¢
Key lock
Hold down the lock key.
£
page 8), an incoming
[
.
k
£
page 11).
i
11