Kohler K-1168 Diagrama De Instalación página 2

No change in measurements if connected with
required drain illustrated. (K-7272)
32" (81.3 cm)
21"
(53.3 cm)
Product Information
Applicable product:
Bath with airjets (not shown)
Bath with airjets and chromatherapy (shown)
Fixture*:
Bathing well:
Basin area, bottom 42" (106.7 cm) x 23-1/2" (59.7 cm)
Basin area, top 55-1/8" (140 cm) x 27-1/8" (68.9 cm)
Weight 100 lbs (45.4 kg)
To overflow:
Water depth 17-1/8" (43.5 cm)
Capacity 81 gal (306.6 L)
* Approximate measurements for comparison only.
Drop-in cutout 59-1/2" (149.9 cm) x 31-1/2" (80 cm)
Blower Heater
motor/control:
300 W
Required accessories:
Bath drain
Optional accessories:
Undermount kit
1087296-1-A
Blower/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H Max
1"
(2.5 cm)
K-1168-G
K-1168-GCR
V Hz A
220-240 50/60 3
K-7272
K-590
1-1/2" (3.8 cm)
60" (152.4 cm)
1/2" (1.3 cm)
2-7/8"
(7.3 cm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Blower motor/control:
Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 55
lbs/square foot (268 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
A blower motor/control access panel is required.
Fixture dimensions are nominal and conform to tolerances in ANSI
Standard Z124.1.2.
2
12-5/8"
(32.1 cm)
16"
(40.6 cm)
2-1/4"
(5.7 cm)
1-1/2" OD
220-240 V, 15 A, 50/60 Hz
Kohler Co.