vitapur VWD1076BLST Guía De Uso Y Cuidado página 7

Installation Of The Faucet
(NO TOOLS REQUIRED)
STEP 1.
Make sure the power cord is disconnected.
Remove the faucet from the lower compartment.
STEP 2.
Check the faucet making sure silicone o-rings are
installed. (See Fig. 2)
WARNING: DO NOT INSTALL THE FAUCET
IF EITHER O-RING IS MISSING. NOTE: For
your convenience we have included 2 spare
silicone o-rings inside the instruction manual
enclosure package.
STEP 3.
Align the faucet nipples with the faucet adapter.
(See Fig. 2)
STEP 4.
Insert the faucet nipples into the faucet adapter.
(See Fig. 2)
STEP 5.
Connect the faucet to the adapter using the faucet
ring turning in a clockwise direction until firmly
secured. (See Fig. 3)
CAUTION: HAND TIGHTEN ONLY
STEP 6.
Check the bottom of the faucet for leaks during
operation. If a leak is detected, remove the faucet,
check the o-rings are not displaced. Repeat
STEPS 3-6.
Fig. 1
Faucet Adapter
1. 2.
Fig. 2
Faucet Assembly
Silicone o-rings (4pcs)
Fig. 3
Faucet Ring