Split Lockwasher - Emerson ASHLAND CF717AP02 El Manual Del Propietario

11. Installation of Light Fitter to Switch Housing
11.3
Rotate the Switch Housing and align the Light Kit Fitter
Plate to line up the Fan Speed Control Pull Chain
Switch for ease of Pull Chain Assembly.
Remove the rubber band and plastic from around the
Switch Housing Pull Chain for ease of assembly.
Position the Fan Speed Control Switch Pull Chain
through the Light Fitter Bushing Hole of the Light Kit
Fitter Plate (Figure 25).
Install the Split Lockwasher and 9/16" Hex Jam Nut
(supplied in the parts bag) onto the Light Fitter/Switch
Housing Assembly and tighten securely (Figure 25).
11.4
Engage the Harness White Wire Connector to the Light
Fitter White Wire Connector until you hear a snap to
secure the Connectors (Figure 26).
Figure 25
Figure 26
16
(Continued)
9/16" HEX JAM NUT

SPLIT LOCKWASHER

SWITCH
HOUSING
ROTATE AND ALIGN
SWITCH HOUSING FAN
PULL CHAIN
LIGHT FITTER
LIGHT FITTER BUSHING
HARNESS WHITE
WIRE CONNECTOR
LIGHT FITTER
WHITE WIRE
CONNECTOR
ETL Model No.: CF717-2