Rena Ware UCU-500 EXTREME Uso Y Mantenimiento página 16

4. INSTALLING THE FILTER
CARTRIDGES
Place the Main Filter Cartridge
base, rotate it clockwise slightly to lock. Install the Pre-Filter Cartridge
on top of the Main Filter Cartridge.
5. ATTACHING THE INLET
ASSEMBLY
The Inlet Assembly attaches to the top of the Pre-Filter Cartridge. It is inserted the same
way the cartridges connect. Rotate the Inlet Assembly approximately 1/8 turn clockwise so
that the tubing lines up with the Outlet Tube.
16
2 in the locking plate on the base. Once inserted into the
label side up
2
outlet tube
1 in the same way,
1
2