Rena Ware UCU-500 EXTREME Uso Y Mantenimiento página 29

g. Connect the Outlet Extension Tube
Connector (3G) to the other end of
the Outlet Extension Tube (3F) and
to the Outlet Tube of the Filter Base
(3H).
Note: When connecting the tubing
to the connectors, be sure the tubing
is completely seated; a small band of
gray tape indicates proper tube depth.
This should require only a moderate
amount of force.
NOTE: DO NOT USE PTFE TAPE
ON THESE NON-THREADED
CONNECTIONS.
4. INSTALLING THE FILTER
CARTRIDGES
Place the Main Filter Cartridge
base, rotate it clockwise slightly to lock. Install the Pre-Filter Cartridge
on top of the Main Filter Cartridge.
3F
3G
2 in the locking plate on the base. Once inserted into the
2
3H
1 in the same way,
1
2
EN
29