Publicidad
Idiomas disponibles
Idiomas disponibles
3. To adjust the position of the Fence, raise the Fence Handle and slide the Fence along the Work Table.
Once position is adjusted, lower the Fence Handle to lock the Fence in place. See Figure 16.
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
WARNING
TOOL SET UP
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool to its "OFF" position and unplug the tool from its electrical outlet before
performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY:
DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR REMOVED.
Moving guards must move freely and close instantly. INSTALL GUARD BEFORE USE.Raising And
Lowering the Saw Blade
When cutting for safety, the top edge of the Saw Blade should rise no more than 1/4" above the top edge
of the workpiece. To increase the Blade height, turn the Control Wheel counterclockwise.
17
www.ELITETOOLS.co
Keep Working
Publicidad
