Cleaning Lock Function - NEFF T43D1 N Instrucciones De Uso

Correcting the time
Switching the timer off
Recommendations and
warnings

Cleaning lock function

Note
Press the Ò symbol until the Q indicator lights up and
use the + or - symbol to change the time.
Press the Ò symbol until the Q indicator lights up and
then press the - symbol until 00 appears in the time
program function display.
The timer will be deactivated after a power cut.
The hotplate automatic OFF function and the timer
function can both be operated simultaneously.
Cleaning the control panel while the hob is on may
change the settings.
To avoid this, the hob has a cleaning lock function.
Press the " symbol. The control panel will remain
locked for approximately 35 seconds.
The surface of the control panel can now be cleaned
without risk of changing the settings.
After the time has elapsed, a warning beep will sound
and the function is deactivated.
The control panel lock has been deactivated.
The lock does not apply to the " symbol or to the
main switch. The cleaning lock function can be
deactivated and the hob can be switched off at any
time.
55