Water Supply Connection - Danby DDW18D1EW Manual De Instalación

INSTALLATION INSTRUCTIONS
STEAM PROTECTION FOIL
Steam will be produced when the dishwasher door
is opened during the operating of the dishwasher
and after the completion of a cycle. Install the steam
protection foil on the underside of the counter top to
prevent the steam from damaging the counter.
Clean the underside of the counter with a damp
cloth before applying the steam protection foil to
ensure the area is clean. Remove the backing from
the foil and place the sticky side of the foil on the
underside of the counter as shown.
Steam protection foil must be applied where the
steam escapes when the door is opened. Failure to
install the steam protection foil during installation
can lead to damage to the cabinets and counter
top.

WATER SUPPLY CONNECTION

Water can be supplied to the dishwasher in two
ways:
• with metal braided hose
• with copper tubing
Hot water supply line: use a minimum 3/4" O.D.
copper tubing or metal braided dishwasher supply
line.
Water inlet valve of the dishwasher has 3/4" - 11.5
NH inlet coupling thread dimension according to
ASME B1.20.7-1991.
When purchasing a water inlet hose, choose the
thread dimensions of the inlet hose as compatible
with indicated water inlet vale inlet coupling thread
dimension 3/4" - 11.5 NH of the dishwasher.
Temperatures required for soldering and sweating
will damage the dishwasher's water inlet valve
so if any such operation is needed, keep the heat
source a minimum of 77/8" (20 cm) away from the
dishwasher's water inlet valve.
There should not be any sharp bends in the water
line that may restrict the water fl ow.
Tefl on tape or pipe tread compound must be used
for sealing the connection. Before connecting the
copper water supply line to the dishwasher, fl ush it
with hot water to clear any foreign material.
6