KTM Power Parts 81235941044 Manual Del Usuario página 5

1
1
2
1
4
5
6
Scope of supply:
1x Fan, complete
1x Fan wiring harness
1x Thermo switch
1x Aluminium seal ring
1x Fan holder
3x Screws
3x Blind rivet
1x thermoswitch with cable
Mounting
Remove the seat and tank. Drain the coolant and remove the right radiator.
Mount the fan on the fan holder using the three screws (1). Run the cables
as illustrated (2).
NOTE:
For Husaberg, only remove the right spoiler and the seat.
Mount the fan holder with the mounted fan on the right radiator, inserting
the 3 blind rivets included in the scope of supply in the holes provided
(3).
3
Mount the right radiator and remove the plug of the radiator.
Up to and including model year 2013:
Mount the thermoswitch (4) with the aluminum seal ring (20 Nm).
Up to and including model year 2013:
Connect the fan wiring harness to the two vacant connectors of the main
wiring harness (5).
Connect the fan wiring harness to the thermoswitch and slide on the
rubber sleeve (6) fully.
58435041000
59011079000
78035045000
0603142015
81235943000
0081500181
77735045000
5