KTM Power Parts 81235941044 Manual Del Usuario página 6

As of model year 2014:
Mount the thermoswitch with the cable (7) and the aluminum seal ring
(20 Nm).
Connect the fan cable to the wiring harness of the thermoswitch.
Connect the wiring harness of the thermal switch with the connector (8)
of the main wiring harness.
8
7
Ensure that the cable is neatly routed without kinking.
Secure the wiring harness with cable binders.
Fill the cooling system and bleed it according to the instructions in the
Owner's Manual.
Check that the fan is functioning properly.
6