Dash Disassembly - Metra 99-6514B Instrucciones De Instalación

1. For vehicles with an 8 speed
transmission:
Unclip and remove the top of the shift
knob assembly. Next, remove the (1)
exposed T-30 Torx screw from the shift
knob and then pull up on the knob to
remove. (Figure A)
For vehicles without an 8 Speed
transmission:
Push the collar down at the base of the
shift knob and remove the pin then pull
up on shift knob to remove. (Figure B)
(Figure A)
2

DASH DISASSEMBLY

(Figure B)
2. Unclip and remove the shifter trim
panel. (Figure C)
3. Remove (2) Phillips screws securing the
pocket below the climate controls then
unclip and remove the pocket. (Figure D)
4. Unclip, unplug, and remove the factory
radio/climate control panel. (Figure E)
5. Remove (4) Phillips screws securing
the radio chassis, and then unplug and
remove the chassis. (Figure F)
Continue to Kit Assembly
(Figure C)
(Figure D)
(Figure E)
(Figure F)
|
1.800.221.0932 MetraOnline.com