Kit Assembly - Metra 99-6514B Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Attach the provided clips to the radio
trim panel (metal clips at top and plastic
at the bottom). (Figure A)
2. Secure the pocket to the radio brackets
with the (4) #8 x 3/8" Phillips pan head
screws supplied. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into radio brackets and
secure with the screws supplied with the
radio. (Figure C)
Continue to Axxess Interface Installation

KIT ASSEMBLY

Clip
locations
(Figure A)
(Figure B)
(Figure C)
ISO DDIN radio provision
1. Attach the provided clips to the radio
trim panel (metal clips at top and plastic
at the bottom). (Figure A)
2. Secure the radio to the radio brackets
using the screws supplied with the
radio. (Figure B)
Continue to Axxess Interface Installation
Clip
locations
(Figure A)
(Figure B)
REV. 8/13/2019 INST99-6514B
3