Orient UY07002T Manual De Instrucciones página 9

 MODELS WITH SCREWED-DOWN CROWN
Some models have a screw down crown that can be locked.
For these models, perform the following procedures before setting.
(1) Before time setting and calendar setting, turn the crown counterclockwise
and loosen.
(2) After time setting and calendar setting are completed, turn the crown
clockwise and tighten.
 MODELS WITH A SCREWED-DOWN BUTTON RING
Depending on the product, some models may have a configuration that allows
the button ring (ring on the outer periphery) to be locked (fixed) into place by
being screwed down.
Use the following operating method for this type of watch.
(1) When wanting to use the buttons, first turn the button ring to the left, and
then loosen it until the screw stops.
* The buttons may not be able to be used if the button ring cannot be
loosened enough. Do not turn it more forcefully than necessary.
(2) After finishing using the buttons, turn the button ring to the right, and firmly
tighten it until the screw stops.
* Do not tighten it more forcefully than necessary.
9