Fuse
The correct time-lag fuse must be fitted for the selected operating
voltage.
Make sure that only fuses with the required rated current and of the
specified type are used for replacement. The use of makeshift fuses and the
short-circuiting of fuse holders are prohibited.
Mains Lead
When a three core mains lead with bare ends is provided it should be
connected as follows:
WARNING! THIS INSTRUMENT MUST BE EARTHED
Any interruption of the mains earth conductor inside or outside the
instrument will make the instrument dangerous. Intentional interruption is
prohibited.
Page 10
For 230V operation use 125mA (T) 250V HBC.
For 115V operation use 250mA (T) 250V HBC.
Brown
Blue
Green/Yellow
-
Mains live
-
Mains Neutral
-
Earth
MZ-805 L/C/R meter
August 2002