Adjust The Brakes With 30Cm Wheels; Install/Remove The 60Cm Wheels; Adjust The Brakes With 60Cm Wheels - ARDEA ONE CP100 Serie Manual De Instrucciones

8.8 Adjust the brakes with 30cm wheels (only for NEXT, DUAL and SKINNY)
8.9 Install/remove the 60cm wheels (only for NEXT GO, DUAL GO and SKINNY GO)
Place the wheel into the central hole on the wheelchair frame
8.10 Adjust the brakes with 60cm wheels (just for DUAL GO)
• When the 30 cm wheels are installed,
place the brake on the milling.
Lock the device by tightening
the Allen wrenches
Note:
so that it can make the right
pressure to securely lock the wheel
(FIG.9)
Only for quick release wheels
•
•
Only for wheels with fixed axle (SKINNY GO)
•
•
(FIG.10)
(FIG.11)
• When the 60 cm wheels are installed,
place the brake on the milling. Lock the
device by tightening the Allen wrenches
(FIG.11)
Note:
make the right pressure to securely lock the
caster
(FIG.9)
adjust the brake device
Remove the plastic cap and
push the wheel until it locks
into the place (FIG.10)
Remove the wheels: push the button
on the centre of the wheel,
and extract the wheel
Place the big wheel and block it with the nut
Unscrew the nut and remove the big wheel
adjust the brake device so that it can
9
(FIG.10)