Tool Use And Care; Service; Specific Safety Information; Foot Switch Safety - RIDGID 1210 Manual Del Usuario

1210 Oil-less Threading Machine
hearing protection must be used for appropriate con-
ditions.

Tool Use and Care

• Do not use if switch does not turn it ON or OFF.
Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
• Disconnect the plug from the power source before
making any adjustments, changing accessories
or storing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
• Store idle tools out of the reach of children and
other untrained persons. Tools are dangerous in
the hands of untrained users.
• Check for misalignment or binding of moving
parts, breakage of parts and any other condition
that may affect the tool's operation. If damaged,
have the tool serviced before using. Many acci-
dents are caused by poorly maintained tools.
• Use only accessories that are recommended for
your tool. Accessories that may be suitable for one tool
may become hazardous when used on another tool.
• Keep handles dry and clean; free from oil and
grease. Allows for better control of the tool.

Service

• Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified repair personnel could result in injury.
• When servicing a tool, use only identical replace-
ment parts. Follow instructions in the Maintenance
Section of this manual. Use of unauthorized parts or
failure to follow maintenance instructions may create a
risk of electrical shock or injury.

Specific Safety Information

WARNING
Read this operator's manual carefully before using
the 1210 Threading Machine. Failure to under-
stand and follow the contents of this manual may
result in electrical shock, fire and/or serious per-
sonal injury.
Call the Ridge Tool Company, Technical Service
Department at (800) 519-3456 if you have any questions.
WARNING
Using a power drive or threading machine without a
foot switch increases the risk of serious injury. A
foot switch provides better control by letting you
shut off the motor by removing your foot. If clothing
should become caught in the machine, it will con-
tinue to wind up, pulling you into the machine.
Because the machine has high torque, the clothing it-
self can bind around your arm or other body parts
with enough force to crush or break bones.

Machine Safety

• Threading Machine is made to thread and cut pipe.
Follow instructions on proper use of this machine.
Do not use for other purposes such as turning
winches. Other uses or modifying this threading ma-
chine for other applications may increase the risk of
serious injury.
• Support long heavy pipe with pipe supports. This
practice will prevent tipping.
• Do not wear gloves or loose clothing when oper-
ating machine. Keep sleeves and jackets buttoned.
Do not reach across the machine or pipe. Clothing
can be caught by the pipe or machine resulting in en-
tanglement and serious injury.
• Operate machine from side with REV/OFF/FOR
switch. Eliminates need to reach over the machine.
• Do not use this machine if the foot switch is broken
or missing. Foot switch is a safety device to prevent
serious injury.
• Keep hands away from rotating pipe and fittings.
Stop the machine before wiping pipe threads or
screwing on fittings. Allow the machine to come to
a complete stop before touching the pipe or ma-
chine chucks. This practice will prevent entanglement
and serious injury.
• Do not use this machine to make or break fittings.
This practice is not an intended use of the machine and
can result in serious injury.
• Tighten chuck handwheel and engage rear cen-
tering devise on the pipe before turning on the
machine. Prevents oscillation of the pipe.
• Keep covers in place. Do not operate the machine
with covers removed. Exposure to moving parts may
result in entanglement and serious injury.
• Allow threads to cool before handling. Threads will
be hot to the touch immediately after threading.
• Use in ventilated area. Prevents accumulation of
coolant vapors.
Ridge Tool Company

Foot Switch Safety

3