03.2 VIEW OF CONNECTIONS
Figure 3.2.a
04. INSTALLATION OF OPTIONAL ACCESSORIES
04.1 PC AMPLIFIED SPEAKERS
For the installation of the speakers, connect the standard plug
P2 on the audio input of the MG3000 [reference 9 in figure
3.1.a/figure 3.2.a].
IMPORTANT: The MG3000 does not supply power to the spe-
akers. The power supply must be made according to the specifi-
cations of the manufacturer of the purchased product.
Figure 4.1.a
04.2 PEN DRIVE
The flash drive must be inserted in the upper input, [reference 10 in
figure 3.1.a/figure 3.2.b].This accessory is used to perform Backup
and Restore of data contained in the internal EEPROM memory of
the MG3000, such as configurations, events and devices registered
in the system, and also to update the equipment's firmware. Use
flash drive formatting as FAT16 or FAT32.
Figure 4.2.a
- ENGLISH -
210
Figure 3.2.b
7