To Lubricate The Bevel Gear And Gearbox; To Clean And Lubricate The Blades; To Examine The Blades - RedMax SRTZ235 Manual De Usuario

1. Move the choke up to close the choke valve.
2. Remove the air filter cover and remove the air filter.
3. Clean the air filter with warm soap water.
4. Replace the air filter if it is too dirty to fully clean.
Always replace a damaged air filter.
5. Clean the inner surface of the filter cover with
compressed air or a brush.
6. Examine the rubber seal for wear and damage.
Replace the rubber seal if it is damaged.
7. Make sure that the filter is dry before you assemble
it.
To lubricate the bevel gear and
gearbox
WARNING:
the product become cool before you touch
the bevel gear and gearbox.
Note:
New products are first filled with grease after
approximately 20 hours of operation.
• Use special grease. Speak to your servicing dealer
for more information.
1695 - 001 - 24.06.2021
To prevent burn injuries, let
• Add the grease through the grease nipple.
CAUTION:

To clean and lubricate the blades

1. Clean the blades from unwanted materials before
and after you use the product.
2. Lubricate the blades before long periods of storage.
Note:
Speak to your servicing dealer for more
information about recommended cleaning agents and
lubricants.

To examine the blades

1. Remove the screw from the gearbox.
Do not fill the gearbox fully.
15