ASSEMBLY
A - Concentrator Nozzle
B - Blower Tube
C - Cordless Axial Blower
1
A
INSTALLING / REMOVING THE BATTERY PACK (See Figure 2)
IMPORTANT! The battery pack is not charged when it is purchased. Before using the blower, read all
safety precautions and follow the instructions in the Battery Pack and Charger section. With regular
use, it will need shorter charging time. If storing for a prolonged period of time, remove the battery.
When ready to use again, charge the battery pack for at least 70 min again.
To install battery pack:
■ Grasp the blower firmly.
■ Slide the battery pack onto the tool, as shown until the latch locks into place (Fig. 2).
■ Do not use force when inserting the battery pack. It should slide into position and "click".
To remove battery pack:
■ Press the release button on the battery pack and remove it from the tool (Fig. 2).
■ Grasp the blower firmly, and pull the battery pack away from the tool.
NOTE: The battery pack fits onto the blower snugly in order to prevent accidental dislodging. It may
require a strong pull to remove it.
Battery Release Button
B
2
Install
C
1
2
Index
Remove
12
Fig 1
Fig 2