OPERATION
STARTING / STOPPING THE BLOWER (See Figure 4)
■ The trigger switch and cruise control lever have the same function, but the cruise control function
keeps the blower working without keeping the trigger switch depressed. The blower power could be
adjusted by either one.
■ Press the trigger switch or turn the cruise control lever to turn on the blower and control the power
by increasing or decreasing the travel of switch.
■ To turn off the blower, release the trigger switch and make sure the cruise control lever is in the
upward position. Do not overexert the trigger switch once the blower has reached the maximal
power (Fig. 4).
CRUISE CONTROL LEVER
Squeeze the trigger switch and move the cruise control lever toward the suitable speed position for
blowing.
USING THE BLOWER (See Figure 5)
■ Press the trigger switch or cruise control lever to turn on the blower. For instructions on using the
cruise control feature, see page 16.
■ Blow debris or grass clippings off of driveways, sidewalks, patios, etc.
■ Gather grass clippings, or leaves into piles. Blow debris from corners, around joints, and between
bricks (Fig. 5).
■ Release the trigger switch and make sure the cruise control lever is in the up position to turn off the
blower.
NOTE: Your Lawnmaster® blower is designed to blow and clean hard surfaces; such as patios,
driveways, decks, garages, and sidewalks.
Low Power
Max Power
16
Cruise Control Lever
Max Power
Low Power
Trigger Switch
Fig 4