TROUBLESHOOTING
Suspected malfunctions are often due to causes that the user can fix themselves.
Therefore check the product using this section. In most cases the problem can be
solved quickly.
WARNING
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an
authorized service center or a similarly qualified specialist if you cannot solve the
problem yourself!
Problem
Unit will not start
when trigger switch is
depressed.
Unit will not blow.
Possible Cause
The battery is not secure.
The battery is defective.
The battery is not charged.
Defective trigger mechanism.
The tube is blocked.
20
Solution
To secure the battery pack,
make sure the latches on
the bottom of the battery
pack snap into place.
Replace with a new,
charged battery.
Charge the battery pack
according to the instructions
in the Operator's Manual.
Take it to an authorized service
center. If within the warranty
period, call Customer Service
(Toll Free Number 866-384-
8432).
Remove battery and clear
debris from in and around
tube.