MAINTENANCE
WARNING
When servicing, use only identical replacement parts. Use of any other parts may
create a hazard or cause product damage.
WARNING
To avoid serious personal injury, always remove the battery pack from the tool
when cleaning or performing any maintenance.
GENERAL MAINTENANCE
■ Remove the battery pack.
■ Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the air
vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the air vents in
water.
■ Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic components. Certain household cleaners may cause
damage, and may cause a shock hazard.
■ Store the blower, the charger and the battery at a temperature between 40°F (4°C) and 100°F (38°C).
BATTERY PACK MAINTENANCE
■ Fully charge the battery before placing in storage.
■ Recharge the battery pack whenever there is a noticeable reduction in the performance. Do not allow
the battery pack to become completely discharged.
■ Do not recharge a battery pack that is already fully charged. Overcharging shortens battery life.
■ Once the battery pack is fully charged, remove the battery from the charger and disconnect the
charger from the outlet.
■ Do not store the battery pack on the tool or on the charger.
■ If the battery pack is hot, allow it to cool down before recharging.
CHARGER MAINTENANCE
■ Keep the charger clean and clear of debris. Do not allow foreign material into the recessed cavity or
on the contacts. Wipe with a dry cloth. Do not use solvents, water, or place in wet conditions.
■ Always unplug the charger when the battery pack is not installed on the charger.
■ Do not store the charger in excessive heat. Do not use in direct sunlight.
■ Disconnect the charger from the AC power outlet when not in use and once battery has reached a full
charge.
18