6- Assembly Of The Fairings (800/900 And 950 Mm Platforms Only) - Nogueira NEW PECUS Duo G2 Manual De Instrucciones

4.2.6- Assembly of the fairings
Place the fairing (S) over the aligners of
1.
the machine;
Fit the spacer bushing (T) into the platform
2.
fairing (S), supplied with the machine;
Secure the platform fairing with the bolt,
3.
washers and nut (U), supplied with the
machine;
U= Hex bolt M10 X 100 (04 pcs)
U= Flat Washer M10 (08 pcs)
U= Lock nut M10 (04 pcs)
Repeat the same procedure to fit the other
4.
side of the platform fairing;
Finishing the platform fairing mounting,
5.
fit it with the bolt and washers (V).
V= Hex Bolt 3/8" X 1 1/2" (02 pcs)
V= Spring Washer 3/8" (02 pcs)
Repeat the same procedure to fit the
6.
other side;
(800/900 and 950 mm platforms only)
U
Instructions Manual
4. Preparation
S
U
T
V
37