Theoretical Length Of Cut - Nogueira NEW PECUS Duo G2 Manual De Instrucciones

4.9- Theoretical length of cut

Different cutting sizes can be obtained,
changed according to the gears used and
the number of chopper rotor knives. Possible
sizes range from 2 to a maximum of 36 mm.
The table below shows the possible cuts, their
gear pairs and the number of knives required
to obtain each size.
How to change the chopped size:
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Remove the bolt (A) fixing the fairing (B);
1.
Lift the fairing (B). Use the rod (F) to
2.
support the open fairing.
Remove the 2 bolts (C);
3.
Remove the cover (D) from the cutter set
4.
box;
Note in the table above which pair of gears
5.
should be mounted to obtain the desired
chop size;
Change the gears (E);
6.
Instructions Manual
4. Preparation
A
B
F
D
C
E
C
65