10- Coupling The Harvester In The Side Position - Nogueira NEW PECUS Duo G2 Manual De Instrucciones

4.2.10- Coupling the harvester in the side position

To facilitate transportation, the harvester leaves the factory prepared for coupling
in the rear position of the tractor (with the arm bent). This is the ideal position
for clearance opening and transporting the machine.
Observe the instructions that follow to place it in the harvest position (side).
REAR COUPLING
Loosen the jam nut (A), the tensioner (B)
1.
and remove the pin (C);
Articulate the arm (D) to the side;
2.
Secure the arm in this position using the
3.
two tensioners (E);
SIDE COUPLING
Instructions Manual
4. Preparation
B
C
D
E
E
A
45