Maintenance - Be Cool vulcano Manual De Instrucciones

height of the headrest as the child grows.
Make sure that the belt guide is about 2cm above the
child's shoulder.
If you need to lower the headrest position do the
same operation in reverse.
3. 2 SEAT RECLINE SYSTEM
The Vulcano child seat has 4 recline positions to
offer the best comfort.
To recline the seat press the recline lever (
pull forward until reaching the required position.

MAINTENANCE

FITTING/REMOVING THE COVER
The cover has 7 fastening points on the front part.
Simply unfasten these points and then gently pull the
IM 2210,00 VULCANO_ print.indd 33
front part of the cover.
On the sides of the seat there are some plastic parts
that are used to fasten the cover. Simply pull these
gently to take the cover off.
To put the cover back on again just follow the same
process in reverse. Fit the parts into the slots for the
sides.
CLEANING THE FABRICS
The seat cover is easily removable and should be
washed on a delicate cycle at 30 degrees using a mild
12 ) and
detergent.
Take out all removable internal plastic/ foam parts
from inside any fabrics before washing.
Do not press, iron, dry clean, tumble dry or wring the
covers.
Do not use solvents, caustic or abrasive cleaning
EN
33
22/9/20 11:11