Using The Vulcano Chair - Be Cool vulcano Manual De Instrucciones

EN
STORING THE 5-POINT SAFETY HARNESS:
Once the child reaches a height of 105cm the 5-point
safety harness should be stored away and the child
should be secured with the vehicle safety belt.
2. 3 To store the 5-point safety harness away it
needs to be fully loosened first. Press the red release
button and undo the harness. Lift the cover under the
cushion and store the buckle parts in the compart-
ment. Then put the cover back on the seat.
2. 4 Open the flap on the back of the seat and stow
the shoulder sections of the harness behind.
CAR SEAT BELT 105-150CM
With the child in the seat pull the seat belt
2. 5
around the front, locating it into both seat belt lap
section guides ( 14
gh the diagonal section seat belt guide (
32
IM 2210,00 VULCANO_ print.indd 32
). Pass the shoulder section throu-
7 ).
Fasten the seat belt buckle and pull the seat belt tight,
removing any slack.
When children's height between 125-150cm, please
use KID-PAD attached with the product.

3. USING THE VULCANO CHAIR

3. 1 HEADREST AND HARNESS ADJUSTMENT
SYSTEM 76-105CM
The headrest should be adjusted so that the shoulder
belts are at the same level as the child's shoulders.
To adjust the harness and headrest pull the headrest
adjustment handle upwards (
headrest ( 1 ). The 5-point safety harness will move
upwards together with the headrest. Place the har-
ness in the correct position showed in the diagram.
105-150CM
Use the headrest adjustment handle to increase the
6 ) whilst moving the
22/9/20 11:11