Electrical Requirements; Installation On Luminance Brands Fans Having A Modular Switch Housing With Center Screw - Luminance Brands Kathy Ireland LK49 Serie El Manual Del Propietario

WARNING
!
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box or circuit breaker
panel before wiring.
Please call Customer Service at 1-800-777-4440 if you have any questions about installation and operation of this
Ceiling Fan Light Fixture Accessory .
3. Installation on Luminance Brands Fans Having a
Modular Switch Housing with Center Screw
3.1
Disconnect Electrical Power to the Branch Circuit at
the Circuit Breaker Panel or Main Fuse Box before
attempting to install the Ceiling Fan Light Fixture .
3.2
Remove the Switch Housing from the Cover Plate by
removing the Three Screws around the side of the
Switch Housing (Figure 1) .
Retain the Three Screws for future use in Step 3 .9 .

2. Electrical Requirements

!
To avoid fire or shock, follow all wiring instructions
carefully.
A n y e l e c t r i c a l w o r k n o t d e s c r i b e d i n t h e s e
instructions should be done or approved by a licensed
electrician.
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box or circuit breaker panel before
wiring. All wiring must be in accordance with National
and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical
shock.
SWITCH HOUSING
SCREWS (3)
Figure 1
4
WARNING
WARNING
COVER
PLATE
SWITCH
HOUSING
U.L. Model No.: LK49