Yakima LowRider Manual De Instrucciones página 2

PREPARE TOWERS: Make sure the wedge is
inside the tower and flush with the face.
L
The clamp should be
as far back as possible.
Push end caps
onto the ends
of the
crossbars.
ON THE CAR'S ROOF:
Set the towers
and bars onto
your car's racks.
Position towers equally
from front of car.
1032634B-2/12
ON A LEVEL SURFACE:
Slide TWO towers
onto EACH crossbar
while keeping the wedges
in place.
Be careful to keep the bars horizontal; the loose
towers could slide from the bar and fall.
Keep the pads
from curling at the
sides when
positioning the
towers.
DO NOT INSTALL
TOWER directly over
factory crossbar.
You may need to move the factory crossbar if
there is any interference with the towers.