Important notes
Foot supports
Care instructions
– The product should be washed
before first use and regularly there-
after.
– Remove the pad from its sleeve
before washing (if present). It can
be cleaned with a moist cloth. To
reinsert the pad correctly after
washing, the pad's curvature must
be pointing to the sole of the foot.
– Wash the product by hand at a
maximum temperature of 30° C.
Use a mild detergent without
softener (e. g. Ofa Clean special
detergent) and rinse the product
out well. Carefully squeeze the
water out without wringing out
the product.
– Mould the product into the right
shape and air-dry it. Do not dry the
product in the dryer, on a radiator
or in direct sunlight and do not
iron.
– In order to maintain the quality of
your product please do not use any
chemical cleaning products, bleach-
es, petrol or fabric softener. Do not
apply any fatty or acidic creams,
ointments or lotions to the skin in
the usage area. These substances
can affect the material of the prod-
uct.
– Store the product in a cool dry
place away from sunlight and heat
and preferably in the original pack-
aging.
– Please dispose of the product
according to local specifications
after the end of use.
Obligation of notification
In accordance with statutory provi-
sions in the EU, patients and users are
obliged to report any serious incident
while using a medical device without
delay to both the manufacturer and the
competent national authority (in Ger-
many the BfArM, the Federal Institute
for Drugs and Medical Devices).