Test The Installation - Yakima DoubleCross Towers Manual De Instrucciones

Position towers equally from front of car.
• Repeat steps
to attach rear
towers and bar.
•Measure EQUAL
distance from
FRONT towers.
IMPORTANT!
NOTE: The distance between the

Test the Installation:

GRAB THE BAR
near the towers
and pull back
and forth.
IF THE TOWER
slides or crossbar
can rotate, check tower
for tightness and
retighten lever.
•Tighten towers
using levers.
•Make sure
Yakima crossbars is
determined by the
accessories you wish to
carry. The Crossbar Spread
Table (Fit List or Catalog)
will tell you how much
crossbar spread your
accessories require.
IF ANY PART OF an accessory or tower contacts the
factory installed crossbars, and the factory bars cannot
move out of the way, they must be removed completely.
MAXIMUM WEIGHT IS SPECIFIC TO YOUR CAR
AND IS LISTED IN THE FIT LIST AT YOUR YAKIMA DEALER.
Always secure long loads at the FRONT and REAR!
the tower
grips the
factory
side rails
SECURELY.
®
SKS Lock
Cores are
optional.
Refer to
Lock Core
instructions
for installation.