Figurt 9.
11. Unscrew the clasp from flexible metal conduit and set
aside. (Figure 10)
Figurt 10.
12. Feed incoming line, neutral and ground wires through
conduit fitting and flexible metal conduit. (Figure 11)
Figurt 11.
Installation Instructions – AP VT
13. Insert line, neutral, and ground wire through hole in end
of conduit clasp and then reattach clasp to the end of
the flexible metal conduit. (Figure 12)
Figurt 12.
14. Feed wires through hole in enclosure and fully reinsert
clasp until it is locked in place. (Figure 13)
Figurt 13.
15. Wire according to NEC code. (Figure 14)
Rated for conductor solid copper wire size 12-18
N
Not:
AWG only. Route wires away from heat generating
components.
Black - Line
Green / Yellow - Ground
White - Neutral
Figurt 14.
EATON
IB519083EN
Driver / Ballast
Installation Instructions
3