INTERFACE FEATURES
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Designed for non-amplified models, or when bypassing a factory amp
• Provides illumination output
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains balance and fade
• Micro-B USB updatable
INTERFACE COMPONENTS
• 3012 interface
• 3012 harness
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip ties
4
AXXESS INTERFACE INSTALLATION
TABLE OF CONTENTS
Connections ..............................................................................................................................................5
Installation ...............................................................................................................................................6
Programming ...........................................................................................................................................6
|
1.800.221.0932
MetraOnline.com