BRITAX RÖMER ADVANSAFIX III SICT Manual De Instrucciones página 3

ADVANSAFIX III SICT
When installing with „semi-universal" approval please observe the following list of
vehicles.
-> Please observe the specifications on this in your vehicle manual.
The ADVANSAFIX III SICT
installation:
„Semi-universal"
with Top Tether and
the ADVANSAFIX III
locking arms into the
ISOFIX fastening
points
This means: the child car seat can be installed
using the Top Tether and the
locking arms using the ISOFIX fastening
points. However, this method of installation may
only be used in those vehicles cited in the
following vehicle type list.
• This type list is constantly updated. The latest
version can be obtained from us or from our
homepage: www.britax.com
• Caution! Always secure your child with the
vehicle´s 3-point seat belt * or the integrated
5-point-harness (depending on the method of
installation).
• Please note: In some vehicles the headroom
in the rear seat is limited. If you fasten the
ADVANSAFIX III SICT
locking arms in these vehicles, it may not be
III
possible to use the child seat up to a body
height of 1.50 m. This may be the case,
for example, if the
headrest hits the vehicle's C-pillar.
SICT
Please observe the heights shown in
the type list.
2
is approved for the following method of
ADVANSAFIX III
with the
ADVANSAFIX
ADVANSAFIX III
*
3-point automatic seatbelt
(in accordance with ECE R 16 or comparable standard)